Technical Bulletin PAGE: 2/8
CAUSE
1. The electrical resistance increases when the paper goes through the fusing
roller and the moisture of the paper evaporates.
2. Due to high electrical resistance characteristics of the paper.
ACTION
Lower the transfer current by changing the following SPs
Only change the paper type and thickness that the user needs to use.
- SP 2-641-001 ~ 078: PTR Bias: BW
- SP 2-642-001 ~ 078: PTR Bias: BW
- SP 2-651-001 ~ 078: PTR Bias: FC
- SP 2-652-001 ~ 078: PTR Bias: FC
Note
If the transfer current is too low, the image may not be solid enough.
To Next Page
