Ricoh J001 - Page 100

PRINTER DISPLAY SUMMARY
J001/J003 4-4 SM
Status Display
Status
Message Display
Ready Ink Supply Low (C)
Cyan Print cartridge is empty. Open the cover and replace the
Cyan Print cartridge.
Right, front cover: Cyan
If you intend to replace more than one cartridge, remove the
empty cartridges and replace them with new ones.
Ready Ink Supply Low (M)
Magenta Print cartridge is empty. Open the cover and replace
the Magenta Print cartridge.
Right, front cover: Magenta
If you intend to replace more than one cartridge, remove the
empty cartridges and replace them with new ones.
Ready Ink Supply Low (Y)
Yellow Print cartridge is empty. Open the cover and replace
the Yellow Print cartridge.
Right, front cover: Yellow
If you intend to replace more than one cartridge, remove the
empty cartridges and replace them with new ones.
Paper is out or not loaded correctly.
Paper Out in Specified
Tray – Bypass Tray
The bypass tray is out of paper. Or, paper in the bypass tray is
not loaded correctly. Load paper in the bypass tray, and then
press the [Paper Feed] on the printer.
Paper is out or not loaded correctly.
Paper Out in Specified
Tray – Tray 1 (Standard)
Tray 1 is out of paper. Or, paper in Tray 1 is not loaded
correctly. Check Tray 1.
Paper is out or not loaded correctly.
Paper Out in Specified
Tray – Tray 2
Tray 2 is out of paper. Or, paper in Tray 2 is not loaded
correctly. Check Tray 2.
Paper Size Error.
Paper in Specified Tray
Doe Not Match Paper Size
Selected for Job – Bypass
Tray
The size of the paper specified for the print job does not match
the size of the paper loaded in the bypass tray. Check the
bypass tray.
Paper Size Error.
Paper in Specified Tray
Doe Not Match Paper Size
Selected for Job – Tray 1
The size of the paper specified for the print job does not match
the size of the paper loaded in Tray 1. Check Tray 1.
Paper Size Error.
Paper in Specified Tray
Doe Not Match Paper Size
Selected for Job – Tray 2
The size of the paper specified for the print job does not match
the size of the paper loaded in Tray 2. Check Tray 2.
Ink Out. Ink End (K)
Ink supply in the Black Print cartridge is exhausted and printing
cannot continue.
Right, front cover: Black
If you intend to replace more than one cartridge, remove the
empty cartridges and replace them with new ones.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA