Ricoh J001 - To Feed 3 Clean Sheets; To Prepare the Printer for Transport; To Select Usb Auto Select Mode

SERVICE INFORMATION
J006 18 SM
5.1.3 TO SELECT USB AUTO SELECT MODE
You can use either USB 1.1 or USB 2.0 in this mode.
1. Press the [Power] key to switch the printer off, then press these keys:
+ +
+
+ +
+
+ +
5.1.4 TO FEED 3 CLEAN SHEETS
This removes condensation from the transport belt.
1. Press the [Power] key to switch the printer off, then press these keys:
+ +
+
2. Press this key sequence 5 times
:
+
+
5.1.5 TO PREPARE THE PRINTER FOR TRANSPORT
1. Press the [Power] key to switch the printer off, then press these keys:
+ + . Then release only when the ink LEDs light.
2. Press and hold
+ , press 8 times then wait for the [Power] key to go off.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA