Ricoh J001 - Cleaning Procedures; Flushing Gate

CLEANING PROCEDURES
J001/J003 2-2 SM
2.3 CLEANING PROCEDURES
2.3.1 FLUSHING GATE
1. Open the top cover.
2. Push the operation lever [A] to the left.
3. Use the tip of a screwdriver or other tool wrapped in soft cloth to remove the ink
that has hardened inside the slits [B] of the flushing gate.
4. Use a slightly damp cloth to wipe clean the ink splatter around the flushing
gates [C].
Important: Dry ink that has collected around the flushing gate can let streaks
show in printouts.
G707P901.BMP
[A]
[B] [C]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA