Ricoh J001 - Crosspiece (J011); Top Cover (J007;J010)

Removing the Covers
SM 3-9 J007/J010/J011
J007/J010/
J011
3.3.2 TOP COVER (J007/J010)
 Remove the right cover.
1. Push both arms to the right to release them at the same time.
2. Detach the top cover from the printer.
3.3.3 CROSSPIECE (J011)
 This crosspiece is part of the J011 only.
 The crosspiece does not need to be removed unless removal of the control board
is necessary.
1. Remove the screw on the left [A] and the screw on the other end (
x2).
2. Raise the crosspiece to remove it.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA