Ricoh J001 - Main Functions; To Select Usb 1.1

SERVICE INFORMATION
SM 17 J006
J006
5.1.1 MAIN FUNCTIONS
Function
Printer
Status
Keys Comment
Power On/Off ---
To power on, press and hold down the [Power]
key for at least 1 sec.
Test Print (Sample)
Off *
1
+ +
Press and hold down [Cancel] and [Paper
Feed], and then press [Power] and hold for at
least 3 sec. until the low ink indicators light red
then release.
Cancel/Restart Job On
After removing the cause of the error, press
[Paper Feed] to restart the print job.
Manual Feed On
When the software application prompts you to
manual feed, load 1 sheet in the bypass tray
and press [Paper Feed].
Feed 1 Cleaning Off
+
To feed 1 blank sheet through the paper feed
path for cleaning, press and hold at least 3
sec. until the ink level LEDs light red then
release.
Clean Print Heads (All) On To execute Normal cleaning of all four print
heads, press and hold for 3 sec. and release
when the [Power] key starts flashing.
Nozzle Check Pattern Off
+
Press and hold for at least 3 sec. until the ink
level LEDs light red then release.
*
1
After pressing the [Power] key to turn the printer off, always wait for the [Power] key to stop
flashing.
5.1.2 TO SELECT USB 1.1
You cannot use USB 2.0 in this mode.
1. Press the [Power] key to switch the printer off, then press these keys*
+ +
+
+ +
+
+ +
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA