UPDATING THE FIRMWARE
J001/J003 5-6 SM
5.3 UPDATING THE FIRMWARE
Important
• The printer must be connected directly to a PC by a USB cable; therefore, the
firmware cannot be updated with Windows 95.
• The printer must be set up and ready for normal operation.
1. Download the version update file (an executable file). Then keep the file in any
folder on the computer.
2. Make sure that the target printer is set up and ready for normal operation.
3. Open Windows Explorer. Then navigate to the folder where the downloaded
update is stored.
4. Double-click the version update file.
5. Do the instructions shown on the screen to complete the update procedure.
The procedure takes about 3 minutes.
To Next Page
Loading...
