Ricoh J001 - Main Functions; Operation Panel Functions

OPERATION PANEL FUNCTIONS
SM 5-1 J001/J003
Service
Information
5. SERVICE INFORMATION
5.1 OPERATION PANEL FUNCTIONS
1 Ink Level LEDs (KCMY)
2 [Power] Key
3 [Paper Feed] Key
4 [Cancel] Key
5.1.1 MAIN FUNCTIONS
Function
Printer
Status
Keys Comment
Power On/Off ---
To power on, press and hold down the
[Power] key for at least 1 sec.
Test Print (Sample)
Off *
1
+ +
Press and hold down [Cancel] and [Paper
Feed], and then press [Power] and hold for
at least 3 sec. until the low ink indicators
light red then release.
Cancel/Restart Job On
After removing the cause of the error,
press [Paper Feed] to restart the print job.
Manual Feed On
When the software application prompts
you to manual feed, load 1 sheet in the
bypass tray and press [Paper Feed].
Feed 1 Cleaning Off
+
To feed 1 blank sheet through the paper
feed path for cleaning, press and hold
down [Paper Feed] then press [Power] for
at least 3 sec. until the ink level LEDs light
red then release.
Clean Print Heads
(All)
On
To execute Normal cleaning of all four print
heads, press and hold [Cancel] for 3 sec.
and release when the [Power] key starts
flashing.
Nozzle Check
Pattern
Off
+
Press and hold [Cancel] for at least 3 sec.
until the ink level LEDs light red then
release. Press and hold down [Cancel],
and then [Power].
*
1
After pressing the [Power] key to turn the printer off, always wait for the [Power] key to stop
flashing.
G707S901.BMP
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA