DUPLEX UNIT (OPTION)
SM 6-51 J001/J003
Detailed
Descriptions
6.11.4 DUPLEX UNIT SET SWITCH
The Duplex Unit set switch [A], a micro switch in the printer, detects the presence
of the Duplex Unit.
This occurs when the Duplex Unit is installed correctly on the back of the printer:
• The unit set lever [B] depresses the Duplex Unit set switch. Then it turns it
on.
The printer signals an error (Paper Jam – Type 1) at these times:
• The Duplex Unit is not installed correctly
• The set lever has not fully depressed the Duplex Unit set switch
G707D948.BMP
G707D947.BMP
[B]
[A]
To Next Page
Loading...
