Ink Supply System
J007/J010/J011 6-24 SM
Inside the printer, the maintenance unit [1] sits on top of the ink collection tank [2].
The ink from the maintenance unit enters the tank through the slot [3].
The ink collection tank [4] sensor detects when the tank is full and needs to be replaced.
Once the ink collection tank is full, discard it.
Obey the local laws and regulations regarding the disposal of items such as the
ink collection tank.
Never attempt to clean an ink collection tank and use it again.
The printer should be able to use one ink collection tank for about 5 years of normal use.
6.4.9 INK COLLECTION INK LEVEL SENSOR
The ink collection ink level sensor [1] is a “smart” reflective photosensor.
The photosensor measures the changes in the density of the ink materials in the tank.
This lets the printer know when the tank is full.
A prompt tells the operator when the printer needs maintenance as soon as this sensor
detects the near-full condition. After the near-full alert prompt appears, the printer is
allowed to print up to the following number of pages until it stops and the tank must be
replaced:
J007/J010: 200 prints
To Next Page
Loading...
