Image Processing
SM 6-49 J007/J010/J011
J007/J010/
J011
6.9 IMAGE PROCESSING
Here is a brief summary of the steps in image processing:
Print Job. The software application sends the print job to the printer driver.
Band Processing. The print job gets divided into units of bands.
Interlace Processing. The bands get broken into scan (print) units. Then the bits get
converted for the direction of printing.
Multi-Band Processing. Processing for individual lines.
Compression Processing. The data gets compressed on the PC side. Then it goes
to the printer.
Decompression. The data gets decompressed when it gets to the printer.
Line Direction Conversion. The lines get converted to match the direction of printing.
It gets rotated 90 degrees depending on whether the print job is for Portrait or
Landscape orientation.
Print Job Processing. The print job gets output.
Printer Output. The print heads on the carriage print the job.
To Next Page
Loading...
