Transport Belt Charge Adjustments
SM 4-31 J007/J010/J011
J007/010/
J011
4.6 TRANSPORT BELT CHARGE ADJUSTMENTS
You can use "Engine Mainte." on the Service Mode menu to adjust the charge pitch for
different areas on the Transport Belt. These charge pitch settings seldom require
adjustments in a normal operating environment unless the following conditions occur:
When the temperature and humidity are low, the print head nozzles frequently
become blocked.
The print head nozzles frequently become blocked when printing on special paper.
The diagram below shows the relationship between charge pitch and the areas where
charge is applied to the transfer below the paper.
Fig. 1 Charge Areas and Pitch
Here is a summary of important terms and abbreviations..
Ter m What It Means
LE Charge Area Leading Edge Charge Area. This is the length of the area where
charge is applied to the Transport Belt below the leading edge of
the paper above.
To Next Page
Loading...
