PRINTER DISPLAY SUMMARY
J001/J003 4-6 SM
Status Display
Status
Message Display
Paper Misfeed. Paper Jam (Duplex Unit)
Paper jam in the Duplex Unit.
Paper Misfeed. Paper Jam (Paper Exit)
Paper jam at the paper exit. Check the paper exit and remove
the jammed sheet.
Paper remains in Bypass Tray.
Paper in Bypass Tray at
Start of Job
Paper remains in the Bypass Tray at the start of the print job.
Remove the paper from the Bypass Tray, and then press the
[Paper Feed] key on the printer.
Print head temperature not within range.
Temperature Out of
Range – Too Low
The temperature of the print head not within the operational
temperature range to allow printing. Turn the printer off, and
then turn it on again. If the printer has been moved to a warm
location from a cold location, allow the printer time to warm up
naturally to the room temperature before you use it.
Printer Engine Error. Engine Service Call
Turn the printer off. Then turn it on again. If this does not solve
the problem, note the error (ERR***-*) displayed on the PC
monitor. (4.3.3)
To Next Page
Loading...
