Ricoh J001 - Page 421

Transport Belt Charge Adjustments
SM 4-35 J007/J010/J011
J007/010/
J011
Paper Image Quality
Mjn (Print
Drive Wave)
Comments
IJ Postcards (Address
Side)
High Speed (Draft) 2 Duplex Mode
Std. (Speed Priority) 2 Default
Std. (Quality
Priority)
2
Glossy Paper Std. (Speed Priority) 2 Default
Std. (Quality
Priority)
4
Transparencies (OHP)
Std. (Quality
Priority)
2 Default
4.6.3 TEMPERATURE/HUMIDITY TABLE
There is a Temperature/Mode Table for every value of Mj (Mj1 to Mj4) that is retrieved from
the Print Mode Table. The system takes Mj from the Print Mode Table and the readings of
the temperature/humidity sensor and then selects for reference the appropriate
Temperature/Humidity Table, matrix of values defined by stepped ranges temperature and
humidity---15 columns for temperature and 8 rows for humidity. The tables below are the
Temperature/Humidity Tables stored in NVRAM before the printer is shipped from the
factory.
J011
Print Drive Wave Form: Mj1
Table 3-1 Mj1 Temperature/Humidity Table
(t912)
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA