Ricoh J001 - Page 440

SP Tables
SM 5-5 J007/J010/J011
J007/J010
J011
image start position on the user image adjustment menu.
[-128 to +127/FA/1/0.1 mm]
1008 REG:FD:OHP:F Adjust Sub Scan Registration (OHP: FA)
Use this SP code to adjust writing in the sub scan direction for transparencies
(OHP). Do this setting when registration does not match the direction of paper
feed selected in the user image adjustment menu.
[-128 to +127/FA/1/0.1 mm]
1009 REG:TR1:OHP:F Adjust Main Scan Registration (Tray 1: OHP: FA)
Use this SP code to adjust writing in the main scan direction for transparencies
(OHP) loaded in Tray 1. Do this setting when registration does not match the
image start position on the user image adjustment menu.
[-128 to +127/FA/1/0.1 mm]
1010 REG:MAN:OHP:F Adjust Main Scan Registration (Bypass: OHP: FA)
Use this SP code to adjust writing in the main scan direction for transparencies
(OHP) loaded in the bypass tray. Do this setting when registration does not
match the image start position on the user image adjustment menu.
[-128 to +127/FA/1/0.1 mm]
1011 REG:FD2:NORM:F
Adjust Sub Scan Registration (Normal Paper: 2nd
Registration: FA)
Use this SP code to adjust writing in the sub scan registration for normal paper.
Do this setting when it is necessary to fine adjust the line feed position.
[-128 to +127/FA/1/0.1 mm]
1012 REG:FD2:GROS:F
Adjust Sub Scan Registration (Glossy Paper: 2nd
Registration: FA)
Use this SP code to adjust writing in the sub scan registration for glossy paper.
Do this setting when it is necessary to fine adjust the line feed position.
[-128 to +127/FA/1/0.1 mm]
Note: This function is under development and is not available for the J007/J010
and J011
1013 REG:FD2:OHP:F Adjust Sub Scan Registration (OHP: 2nd Registration: FA)
Use this SP code to adjust writing in the sub scan direction for transparencies
(OHP). Do this setting when it is necessary to fine adjust the line feed position.
[-128 to +127/FA/1/0.1 mm]
Note: This function is under development and is not available for the J007/J010
and J011
Paper Feed
1014 FDLEN:F Adjust Amount of Paper Feed (FA)
Do this SP adjust the amount of line feed for 1 scan line. Do this setting only if
the line feed amount cannot be adjusted on the user menu of the printer
operation panel with "Adj. Paper Feed".
[-1000000 to +1000000/FA/1 um]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA