INSTALLATION PROCEDURE
J001/J003 1-18 SM
3. Pinch the tabs of the side fences [A], [B] on the left and right side of the paper
cassette. Then move them to correct position for the paper size you want (A4
or LTR).
4. Pinch the tabs of the bottom fence [C]. Then slide it forward completely.
5. Get a stack of paper. Then fan it to remove static cling.
6. Load the paper into the cassette.
7. Add paper until it gets to the load limit marks [D].
Important: Never load paper higher than the load limit mark.
G707I926.BMP
G707I927.BMP
[A]
[B]
[C]
[D]
To Next Page
Loading...
