SP Tables
M047 3-42 SM Appendix
18
The rescue certification of No. 17 has been recorded, and the GW
URL is being notified of the failure of the certification update.
5816 068 Cer Abnml Cause
Displays a number code that describes the reason for the request for update
of the certification.
0 Normal. There is no request for certification update in progress.
1
Request for certification update in progress. The current certification
has expired.
2
An SSL error notification has been issued. Issued after the certification
has expired.
3
Notification of shift from a common authentication to an individual
certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
5816 069 Cer Updt ReqID The ID of the request for certification.
5816 083 Firm Updating Displays the status of the firmware update.
5816 085 Firm UpUsr Conf
This SP setting determines if the operator can
confirm the previous version of the firmware
before the firmware update execution. If the
option to confirm the previous version is
selected, a notification is sent to the system
manager and the firmware update is done with
the firmware files from the URL.
5816 086 Firmware Size
Allows the service technician to confirm the size
of the firmware data files during the firmware
update execution.
To Next Page
