MsgI03:
How to modify the all the receiver number of sms message input blocks in the program ?
If you want to modify the receiver number in all the sms message input block, you can edit the short
message format like this:
##**
ALL:TELI,1:13851448223;
(Note: This command is only for 2G version unit, it is unavailable for 4G version unit)
This is to change receiver 1 for all the sms message input block in the program.
TELI, means the “SMS message input block”
1 means the receiver 1 in the block, this number can be 1 to 5.
13851448223; It is the phone number which will be set into the receiver.
To Next Page
Loading...
