Rievtech x-Messenger Series

To Next Page

To Previous Page

Send an SMS message formatted like the example below

##**

PGPRS:

TIMEOUT"60",

IPORDOMAIN"0",

POWCONNECT"0",

APN"CMNET",

TADR"221.226.189.74",

TPORT"5005",

SNUMB"12345678",

DOMAIN"www.wyl.com";

Message Parameters:

Start characters: ##** (These 4 characters must be included at the start of your message)

Parameters interval characters: , (This symbol must be used to differentiate each parameter of your

message )

End character: ; (This symbol must be used to terminate each line of your message )

Parameters:

PGPRS : (This head means the below contents is used to modify the GPRS parameters)

TIMEOUT"60", (This is to change the time out period, the unit is “second” and the minimum value is

30, if you set the value less than 30, x-Messenger would set 30 automatic value)

Rievtech x-Messenger Series - Page 41