Step2: Program in the eSmsConfig.exe.
Example
Regarding the program. We need realize the below logic.
1.I1--I4 in master to control the Q1--Q4 in slave1&salve2, if I1 is ON in master, the corresponding Q1 in
salves is ON; I2 is ON in master, the corresponding Q2 in salves is ON;....I4 is On in master, the corresponding
Q4 in salves is ON. If I1 is OFF in master, the corresponding Q1 in salves is OFF.......I4 is OFF in master, the
corresponding Q4 in salves is OFF.
2. Read the Inputs I1--I4 status of slave 1 to control the F11--F13 in master; Read the Inputs I1--I4 status
of slave 2 to control the F21--F23.
3. Read the AF1 value of slave1 to be saved in the AF1 of master; Read AF1 value of slave2 to be saved in AF2
of master.
To Next Page
