Panel key:
You can
’
t change the status of panel key, it only can be read.
Shift register bit:
You can’t change the status of shift register bit, it only can be read.
User Management
User management interface
You can set a new user name and new password at this page. If you have set a new user name and
password,the old user name and password can’t be used.A web server just has a user name and a password.
If you forgot the user name or password you logged, you can reset it by the LCD menu
You can make the IP settings to factory by the menu Network-> IP Config..-> Factory-> RST Log on
To Next Page
Loading...
