107
Creating and Editing Samples (Sample Mode)
Creating and Editing Samples (Sample Mode)
Moving a Sample (SAMPLE Move)
1.
Access the SAMPLE Top screen (p. 104).
2.
Touch <
▼
MENU> in the upper right of the screen.
A pulldown menu appears.
fig.04-03_50
3.
In the pulldown menu, touch <SAMPLE Move>.
The SAMPLE Move window appears.
fig.04-04b_50
4.
Move the cursor to “Source” and select the move-source
sample.
5.
Move the cursor to “Destination” and select the move-
destination sample.
When you touch <List>, the Sample List window will appear,
allowing you to select the sample from the list.
6.
Touch <Execute> to execute the move operation.
Exchanging a Sample
(SAMPLE Exchange)
1.
Access the SAMPLE Top screen (p. 104).
2.
Touch <
▼
MENU> in the upper right of the screen.
A pulldown menu appears.
fig.04-03_50
3.
In the pulldown menu, touch <SAMPLE Exchange>.
The SAMPLE Exchange window appears.
fig.04-04c_50
4.
Move the cursor to “Source” and select the exchange-
source sample.
5.
Move the cursor to “Destination” and select the exchange-
destination sample.
When you touch <List>, the Sample List window will appear,
allowing you to select the sample from the list.
6.
Touch <Execute> to execute the exchange operation.
Reference_e.book 107 ページ ２００５年３月１０日 木曜日 午後５時６分
To Next Page
Loading...
