164
COSM List
TVF
Cuts off a specific frequency band to change a sounds
brightness, thickness, and other qualities.
Dynamic TVF
Cuts off a specific frequency band to change a sounds
brightness, thickness, and other qualities. A wah effect
can be applied by using the volume of the input sound
to vary the center frequency.
Polyphonic Compressor
Flattens out high levels and boosts low levels,
smoothing out unevenness in volume.
Polyphonic Limiter
Compresses signals that exceed a specified volume
level, preventing distortion from occurring.
Parameter
Value Description
COSM Type
Filter Type
LPF, BPF, HPF,
NOTCH, PEAK
Type of filter
db/Octave -24dB/oct, -12dB/
oct, -6dB/oct
Amount of attenuation per
octave
Cutoff
Freq #1
0–127 Cutoff frequency of the fil-
ter
Freq KF -200– +200 Key follow setting for filter
cutoff frequency
LFO Dp #3 -63– +63 Amount of LFO applied to
filter cutoff frequency
* For details on envelope settings, refer to
“Making Envelope
Settings”
(p. 94).
Resonance
Reso #2
0–127 Resonance
R LFO Depth #4 -63– +63 Amount of LFO applied to
resonance
* For details on envelope settings, refer to
“Making Envelope
Settings”
(p. 94).
LFO
* For details on LFO settings, refer to
“Making LFO Settings”
(p.
95).
Parameter
Value Description
COSM Type
Filter Type
LPF, BPF, HPF,
NOTCH, PEAK
Type of filter
db/Octave -24dB/oct, -12dB/
oct, -6dB/oct
Amount of attenuation per
octave
Cutoff
Freq #1
0–127 Cutoff frequency of the fil-
ter
Freq KF -200– +200 Key follow setting for filter
cutoff frequency
Dyn -63– +63 Envelope depth for the in-
put sound
LFO Dp #4 -63– +63 Amount of LFO applied to
filter cutoff frequency
* For details on envelope settings, refer to
“Making Envelope
Settings”
(p. 94).
Resonance
Reso #2
0–127 Resonance
Dyn Env -63– +63 Envelope depth for the in-
put sound
R LFO Dp #4 -63– +63 Amount of LFO applied to
resonance
* For details on envelope settings, refer to
“Making Envelope
Settings”
(p. 94).
LFO
* For details on LFO settings, refer to
“Making LFO Settings”
(p.
95).
Parameter Value Description
COSM Type
Attack #1 0–127 Attack time
Sustain #2 0–127 Sustain level
Output Level 0–127 Output Level
Parameter Value Description
COSM Type
Thres
0–127 Sets the volume level at
which the compression be-
gins.
Ratio 2:1, 4:1, 16:1, 100:1 Compression ratio
Attack #1 0–127 Attack time
Release #2 0–127 Release time
Output 0–127 Output Level
Reference_e.book 164 ページ ２００５年３月１０日 木曜日 午後５時６分
To Next Page
Loading...
Need help?
General
