Roland V-Synth - Creating a Patch; Creating a Patch Intuitively (Sound Shaper)

38
Creating a Patch
This section explains the procedure for creating a patch on the V-Synth. Broadly
speaking, there are two ways to create a patch.
Using a template to create a patch intuitively (the Sound Shaper
function)
You can easily create a patch just by choosing a group and template.
Refer to “ Creating a patch intuitively (Sound Shaper) ”(p. 38).
Creating a patch from scratch
This section explains the basic procedure for creating a patch on the V-Synth.
Refer to “ Initializing Patch Settings ”(p. 40).
Creating a patch intuitively (Sound Shaper)
The “Sound Shaper” function lets you create a patch simply by choosing a group and
template, and operating knobs and buttons to edit the relevant aspects of the sound,
just like a professional sound designer.
1
Make sure that the PATCH PLAY screen is displayed.
2
At the upper right of the screen, touch < ▼ MENU >.
A pulldown menu will appear.
3
In the pulldown menu, touch < Sound Shaper >.
The following window will appear.
Choose the “Group” and “Template” that are closest to the sound you want to create.
Use the list at the left to choose a group, and use the list at the right to choose a
template. Then touch < Enter >.
Reference_e.book 38 ページ ２００５年３月１０日 木曜日 午後５時６分