39
Creating a Patch
Quick Start
4
A window like the following will appear.
While playing the keyboard, use the eight switches and knobs to adjust the sound.
• The V-Synth’s knobs shown in the diagram below correspond to the knobs in the
screen.
• Some buttons have an on/off function, while others select choices from a list.
5
At the bottom of the screen, touch the < FX > tab to make effect
settings.
From the top, the effects are MFX (multi-effect), chorus, and reverb.
• You can use the button for each effect to turn it on/off.
• If you want to switch the type of an effect, touch the effect name to highlight it,
and then turn the VALUE dial or use [INC/+][DEC/-].
• In the Sound Shaper you can edit only the main parameters of each effect, using
the on-screen knobs.
6
In the lower right of the screen, touch < Write > to open the “Patch
Write” screen, where you can save the patch you created.
To save your patch, use the procedure described
in “
Saving Patches (PATCH Write)
”(p. 51).
For each template, the most
suitable parameters have been
automatically selected for each
of the eight switches and
knobs.
For details on each effect, refer
to “Effects List ”(p. 166).
For more about the Sound
Shaper function, refer to
“Creating a patch intuitively
(Sound Shaper) ”(p. 76).
Reference_e.book 39 ページ ２００５年３月１０日 木曜日 午後５時６分
To Next Page
Loading...
Need help?
General
