178
Effects List
23: Analog Phaser
This effect features two analog-type phasers arranged in parallel,
making it stereo compatible. The sound as it cyclically drifts in and
out of phase is added to the source sound, creating the modulation
with the characteristic of phasers.
fig.MFX-23
24: Digital Phaser
Phaser is an effect that adds a phase-shifted sound to the original
sound to create time-varying change, modulating the sound.
fig.MFX-24
Parameter
Value Description
Shift Mode
4STAGE,
8STAGE
Sets the number of stages in the
phase shift circuit (four (4STAG)
or eight (8STAGE)).
Setting this to eight stages
(8STAGE) increases the number
of the frequency points that
sound is canceled, giving a
sharper effect.
Center Freq #1 0–127 Sets the center frequency to
which the phaser effect is ap-
plied.
Increasing this value moves the
effect point of the phaser into
higher frequency ranges.
Resonance 0–127 Amount of feedback
Increasing this value gives a
more distinctive sound to the ef-
fect.
LFO 1/2 Rate 0.02–5.00 Hz,
note
Sets the rate of the swelling
sound.
LFO 1/2 Depth 0–127 Specifies the depth of modula-
tion.
LFO 1/2 Phase NORM, INV Sets the phase of both left and
right swelling.
NORM: The left and right phase
will be the same.
INV: The left and right phase
will be opposite.
L
R
Analog
Phaser
Freq.
Level
Freq.
Level
4 stage
8 stage
Parameter
Value Description
Shift Mode
4STAGE,
8STAGE
Sets the number of stages in the
phase shift circuit (four (4STAG)
or eight (8STAGE)).
Setting this to eight stages
(8STAGE) increases the number
of the frequency points that
sound is canceled, giving a
sharper effect.
Manual 0–127 Specifies the center frequency at
which the sound is modulated.
Rate #1 0.05–10.0 Hz,
note
Specifies the frequency of mod-
ulation.
Depth #2 0–127 Specifies the depth of modula-
tion.
Phase NORM, INV Sets the phase of both left and
right swelling.
NORM: The left and right phase
will be the same.
INV: The left and right phase
will be opposite.
Resonance 0–127 Specifies the amount of feed-
back for the phaser.
Higher settings will give the
sound a stronger character.
Mix Level 0–127 Volume of the phase-shifted
sound, relative to the direct
sound
Ps Low Freq 50–4000 Hz Frequency of the low range
Ps Low Gain -15– +15 dB Gain of the low range
Ps Hi Freq 2000–20000 Hz Frequency of the high range
Ps Hi Gain -15– +15 dB Gain of the high range
L
R
2-Band
EQ
Phaser
Freq.
Level
Freq.
Level
4 stage
8 stage
Reference_e.book 178 ページ ２００５年３月１０日 木曜日 午後５時６分
To Next Page
Loading...
Need help?
General
