45
Creating a Patch
Quick Start
Mixing/Modulating Two Sounds (Mod)
The Modulator mixes and modulates the two audio signals.
Selecting a Modulator Type
1
In the lower part of the screen, touch <Mod>.
A screen like the following appears.
fig.Q-32_60
2
In the Modulator Type area, select the modulator type you wish to use.
Modulator Type
Description
MIX
Add OSC1 and OSC2.
RING
Use OSC2 to apply ring modulation to OSC1.
FM
Use OSC2 to apply FM (frequency modulation) to OSC1.
ENV RING
Use the envelope of OSC2 to control the volume of OSC1.
OSC SYNC
Synchronize the output waveform of OSC1 to the output
waveform of OSC2.
OSC SYNC is valid only when
OSC2 is an analog oscillator.
For more about the modulator
settings, refer to “Mixing/
Modulating Two Sounds
(MOD) ”(p. 92).
Reference_e.book 45 ページ ２００５年３月１０日 木曜日 午後５時６分
To Next Page
Loading...
