74
Creating a Patch
You can also assign a category by touching <Category> in the
Patch Write window.
fig.06
*1 You will lose your edited patch settings if you switch to another patch
or turn off the power. If you want to keep a patch whose settings you
have edited, then perform the Save operation (p. 74).
Saving Patches (PATCH Write)
Changes you make to sound settings are temporary, and will be lost
if you turn off the power or select another sound. If you want to keep
the modified sound, you must save it in the internal (internal
memory).
When you modify the settings of a patch, the PATCH PLAY screen
will indicate “EDITED.” Once you save the patch into internal
memory, the “EDITED” indication goes away.
When you perform the save procedure, the data that previously
occupied the save destination will be lost. However, the factory
setting data can be recovered by performing the Factory Reset
(p. 147).
1.
Make sure that the patch you wish to save is selected.
2.
Touch <
▼
MENU> in the upper right of the screen.
A pulldown menu appears.
fig.03-03a_50
3.
In the pulldown menu, touch <PATCH Write>.
The PATCH Write window appears.
fig.03-04_50
4.
Turn the VALUE dial to specify the save-destination patch.
Reference_e.book 74 ページ ２００５年３月１０日 木曜日 午後５時６分
To Next Page
Loading...
Need help?
General
