58
Playing in Patch Mode
Patch mode is the mode in which you can play the keyboard using a
single sound (patch or rhythm set).
About the PATCH PLAY Screen
Displaying PATCH PLAY Screen
To access the PATCH PLAY screen, use the following procedure.
1.
Press [MODE].
The V-SYNTH Mode MENU window appears.
fig.MODE_50
2.
Touch <PATCH>.
You will enter Patch mode, and the PATCH PLAY screen
appears.
fig.PATCH_50
Functions in the PATCH PLAY Screen
fig.02-01.e
Selecting a Patch
V-Synth contains 512 patches for you to select and use.
All of these patches can be overwritten.
1.
Access the PATCH PLAY screen (p. 58).
fig.02-02.e
2.
Move the cursor to the patch number, either by using the
cursor buttons or by touching the patch number display.
3.
Turn the VALUE dial, or press [INC/+][DEC/-] to select a
patch number. You can also do this by dragging on the
touch screen.
Indicates the current mode.
Indicates the MIDI transmit channel (Tx) and receive channel (Rx).
Displays the various patch setting screens.
Sets the Transpose and the Octave Shift.
Indicates/sets the tempo.
Indicates the name and zone
of the selected patch.
Opens the pulldown menu.
Return to the PATCH PLAY screen.
Indicates/selects the
number and name
of the selected patch.
Indicates/sets the zone
Graphically displays
the parameter settings
of the selected patch.
Indicates a list of patches.
Patch number
Reference_e.book 58 ページ ２００５年３月１０日 木曜日 午後５時６分
To Next Page
Loading...
Need help?
General
