57
Overview of the V-Synth
Overview
Disk Mode (p. 131)
fig.DISK_50
In this mode, you can perform operations related to disks, such
as saving data on a disk or loading data from a disk.
USB Mode (p. 138)
fig.USB_50
In this mode, you can connect the V-Synth to your computer and
exchange patch or wave data.
Calibration Mode (p. 148)
fig.CALIBRATION_50
In this mode you can adjust the response of the touch screen and
D Beam controller.
Factory Reset Mode (p. 147)
fig.FACTORY_50
In this mode, you can reset to default factory settings.
Demo Mode
fig.DEMO_50
This is a demo screen mode that introduces you to the V-Synth’s
functionality.
System Mode (p. 121)
fig.SYSTEM_50
In this mode, you can set the overall behavior of the V-Synth,
such as its tuning and how it handles received MIDI messages.
Reference_e.book 57 ページ ２００５年３月１０日 木曜日 午後５時６分
To Next Page
Loading...
