EasyManua.ls Logo

Roland V-Synth - Page 130

Roland V-Synth
213 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
129
Settings Common to All Modes (System Mode)
Settings Common to All Modes (System Mode)
VFX3:
Visual effects 3
VFX4:
Visual effects 4
OUTPUT-FADE:
Output fade
T-BAR:
T bar
Assign-TT (V-LINK Assign-Time Trip)
Specify the V-LINK function that will be controlled when you
operate the Time Trip pad in Time Trip mode.
Value
OFF:
The time trip pad will not be used.
TIME-TRIP:
Time trip
Knob 1, 2 Local Sw
(V-LINK Knob1, 2 Local Switch)
Specify whether the assignable controller knobs 1 or 2 will be
disconnected from the internal sound generator in V-LINK mode
(OFF) or not disconnected (ON).
Value:
OFF, ON
Knob 1, 2 Assign (V-LINK Knob1, 2 Assign)
Specify the V-LINK function that will be controlled when you turn
the ASSIGNABLE CONTROL knob.
Value
OFF:
The assignable controller will not be used.
PLAYBACK-SPEED:
Playback speed
DISSOLVE-TIME:
Dissolve time (time over which the image
switches)
AUDIO LEVEL:
Volume during audio playback
COLOR-CB:
Color Cb (color-difference signal)
COLOR-CR:
Color Cr (color-difference signal)
BRIGHTNESS:
Brightness
VFX1:
Visual effects 1
VFX2:
Visual effects 2
VFX3:
Visual effects 3
VFX4:
Visual effects 4
OUTPUT-FADE:
Output fade
Beam
fig.05-12_50
Beam Local Sw (V-LINK D Beam Local Switch)
Specify whether the D Beam controller will be disconnected from the
internal sound generator in V-LINK mode (OFF) or not disconnected
(ON).
Value:
OFF, ON
D Beam 1–4 Assign L, R
(V-LINK D Beam1–4 Assign L, R)
Specify the V-LINK function that will be controlled when you
operate the D Beam controller. Assign L is the left side, and Assign R
is the right side.
Value
OFF:
The D Beam controller will not be used.
PLAYBACK-SPEED:
Playback speed
DISSOLVE-TIME:
Dissolve time (time over which the image
switches)
AUDIO LEVEL:
Volume during audio playback
COLOR-CB:
Color Cb (color-difference signal)
COLOR-CR:
Color Cr (color-difference signal)
BRIGHTNESS:
Brightness
VFX1:
Visual effects 1
VFX2:
Visual effects 2
VFX3:
Visual effects 3
VFX4:
Visual effects 4
OUTPUT-FADE:
Output fade
Reference_e.book 129 ページ 2005年3月10日 木曜日 午後5時6分

Table of Contents

Other manuals for Roland V-Synth

Related product manuals