FLEX-AUGER - INSTRUCTIONS FOR THE USER
ROXELL - 031- 0516
I-3
1. Beforeyoudoanyrepair,ormaintenanceworks,alwaysdisconnecttheelectricitysup-
plybymeansofthemainswitch.
2. Ensure you wear personal protection equipment (gloves, dust masks).
3. The system starts automatically.
Never use yourhands at dangerous locations(feed intake boots, drive units, controlunits
or outlet holes in the tubes) before you have completely switched off the transport system
andmadesurethatnobody can switch it on without your knowledge.
4. Take care that neither strangers nor children can open the bin boot.
5. Never allow unauthorized persons to enter the house in your absence.
6. If the auger stalls : immediately switch off the system. Carefully read the trouble shooting
guide and strictly follow instructions. Contact a technically trained person.
An auger under tension can cause very serious injuries when released.
7. Regularly check the elbow/trough and/or tube connections. Tighten if necessary.
8. Ensure that the hopper cover (grill) or cover on the 100 kg hopper closes properly.
9. Regularly check that the control unit and/or the motor handy box are properly closed.
GENERAL SAFETY RULES
IMPORTANT
Flex Auger Nr. : 031...
Transportsysteem voor droogvoeder van dieren
Transport system of dry feed for animals
Carefull read the following instructions before you
INSTALL the system
This SYMBOL will be used to draw your attention to matters that
are of GREAT IMPORTANCE for your SAFETY.
It means :
WARNING - follow the safety instructions :
disconnect t he current - re-read the safety rules.
In short :
BE ALERT. IGNORING these instructions can cause
SERIOUS INJURIES or even DEATH.
DANGER
To Next Page
Loading...
