ROXELL - 031 - 0516
FLEX-AUGER - INSTALLATION INSTRUCTIONS
III-48
TO INSTALL THE DROP TUBES
L
FIGURE 105.
WITHOUT TELESCOPICAL TUBE
:
Cut the drop tube to
the exact length, so
thatyouhavethere-
quired amount of feed
in the hopper.
FIGURE 106.
WITH TELESCOPICAL TUBE
:
Heightofthedroptubeinthe
feeding trough or hopper can be
adjusted individually and at any
time.
Distance between trough bottom
and drop tube must be about
1,10m.
min. 1.1m
FIGURE 107.
WITH FLEXIBLE TUBE
:
Flexible in practically all directions.
Do not forget the 2 parcker screws
D.4.2x13.
To Next Page
Loading...
