DEPARTMENT STATUS
(Continued)
TO PROGRAM DEPARTMENTS AS
TAXABLE
"PR(>' .; (Ai::l.MIle/Oea<:tivale)
.;
(St.andan:!/Gallonage Oorpl.) + (Multiple/Single
Entry)
+
(\"101..0
#)
+ (Tax
Sla!us
#) +
r.:rr
fW
fT~
1
elign
f 1 dlgn # 1 dlglt # 1
el19~
#
:2
digtt #
+ II"rice') + (Dept.)
7 dlglt #
ImllJlimum)
• Optional: If
no
preset price is desired, skip entering
the
price.
Example: Program Department 1
to
charge a single tax rate
(TAX
1); HDLO of ·0· and Multiple.
Entry/Positive Price and' preset price of $1.00:
1.
Turn
the key
to
the
·PRG" (PROGRAM) position.
2.
. If a PRGjZ Manager Password has been programmed, TYPE the (PASSWORD
#).
then
PRESS
the (CHECK)
Key,
or if you did not program a
PRGjZManager
Password, go
to
Step
3.
3.
TYPE (0)(0)(0)(0)(0)(1), PRESS the (ST
fWfTAX)
Key.
4.
TYPE (100), then PRESS the (DEPARTMENT 1)
Key.
If you
do
not wish
to
preset a price, only
PRESS the (DEPARTMENT 1) Key on this Step.
Important: It is not necessary
to
press the decimal point when entering a price,
*
Repeat Steps 3 and 4 before every Department Key you wish
to
charge tax.
TO
PROGRAM
DEPARTMENTS
AS
NON-TAXABLE
Although the factory default setting of all departments
is
non-taxable, you may need to program certain
department
keys
for the non-tax setting.
'PAG'
.;
IAt::livale/Deacti""'el
,
digh
t
..
ISland"'d/GaJlonag~
Oorp!.j
.;
1
dig"
t
jMuhlpl~/Slngl.
Entry) +
(HDLO
#)
+ (Tax SlalUS #) +
(:;rfWfT~
+ IPrice') ..
1 digit # 1
digit'
:2
dig"
#-
7 digit "
lmaximum)
(Dept)
• Optional:
If
no preset price is desired, skip entering the price.
Example: Program Department 2
as
non-taxable, HOLD of ·0", and Multiple Entry/Positive Price and
preset price of $1.00:
1. Turn
the
key
to
the
·PRG" (PROGRAM) position.
2.
If
a PRG/Z Manager Password has been programmed, TYPE the (PASSWORD
#),
then PRESS
the (CHECK)
Key,
or if you did not program a PRGjZ Manager Password,
go
to
Step
3.
3.
TYPE (0)(0)(0)(0)(0)(0), PRESS the
(STjWfTAX)
Key.
4.
TYPE (100), then PRESS the (DEPARTMENT
1)
Key.
If you
do
not
wish
to
preset a price, only
PRESS the (DEPARTMENT
1)
Key on this Step.
Important: It is not necessary
to
press the decimal point when entering a price .
..
*
Repeat Steps 3 and 4 before every Department
Key
you wish
to
charge
no
tax.
Confirmation Report: The programming of the Departments
is
done in a non·print mode. To check your
results, a Program Confirmation Report is available. For details
see
Page
44.
To Next Page
Loading...
