122 P Mode Programming SPS-2000 Program Manual v1.30
General Printing Option Definitions
(1) PRINT ON RECEIPT:
EMPLOYEE NAME
CONSECUTIVE #
ITEMS BY GROUP
DATE
TIME
PREAMBLE/POSTAMBLE
ORDER #
SEAT #
Determine the content of each receipt by selecting Yes or No for each item.
(2) RECEIPT FEED LINES AFTER PRINT
Enter the number of lines you wish to feed after each receipt is printed. (Makes chit larger.)
(3) LNES AFTER PREAMBLE
Enter the number of lines you wish to feed after the preamble and before the first receipt print line.
(4) LNES BEFORE POSTAMBLE
Enter the number of lines you wish to after the last receipt line and before the postamble.
(5) BUFFERED RECEIPT: STUB / FULL
A stub receipt contains only the total, tender and transaction information. A full receipt includes item
detail.
(6) PRINT RECEIPT WHEN SIGNING ON/OFF
If Yes, a receipt is printed whenever an employee signs off or on.
(7) PRINT RECEIPT WHEN CLOCKING IN/OUT
If Yes, a receipt is printed whenever an employee clocks in or out.
(8) CONDENSE TRAY SBTL RECEIPTS
Prints each separate tray subtotal receipt without preamble/postamble.
(9) DETAIL: REAL TIME / BATCH
Prints detail (journal) on journal printer (or updates electronic journal) line by line (real time) or at
transaction finalization (batch).
(10) PRINT PLU CODE WITH DESCRIPTOR
If Yes, both the PLU# and descriptor will print when a PLU is registered.
(11) TRANSACTION # IS RANDOM NUMBER
If Yes, the transaction # is generated randomly, rather than sequentially.
(12) HOME CURRENCY SYMBOL ($=DEFAULT)
Select the currency symbol for display, receipts, etc.
(13-17) CURRENCY (1-5) SYMBOL
Select the currency symbols to be used for the currency conversion function keys.
(18) PRINT TENDER ON RECEIPT
If No, the tender will not print on the receipt.
(19) DISABLE LINE FIND ON SLIP PRINTER
To Next Page
Loading...
Need help?
General
