Sam4s SPS-2000 - Guest Check Tracking Program Guide (Soft Check)

SPS-2000 Program Manual v1.30 Program Guides  167
Guest Check Tracking Program Guide (Soft Check)
 You must set the check tracking method to “Soft”. See S Mode Memory Allocation
option #8.
 You must set the maximum number of lines per check. See S Mode Memory
Allocation option #11.
 You must set the maximum number of check for each tracking file. See S Mode
Memory Allocation option #12.
 You must set the register number that holds the check tracking file and backup file.
See S Mode System options #10 and #11.
 You must assign function keys as necessary
RECALL CHECK (1-4) – Use to open or recall checks
STORE CHECK (1-4) – Use to finalize postings
TABLE (1-4) – Use to assign a table number or recall a check
LIST CHECK (1-4) – Use to view open checks
TRANSFER CHECK (1-4) – Use to transfer checks
 You must set the options for the Recall Check key. See P Mode Function Keys
#197-200. Options set here include:
 Enforce Seat Number
 Table Entry Required
 Multiple Checks Allowed for each Table
 Guest Count Entry Required
 Compulsory for all Sales
 (Check #) Assigned by Register
 Opening Employee has Exclusive Access
 Print Receipt after Store Check
 Other related options
 Set P Mode System Options/Tracking File Options
 Starting Check Numbers
 Options to reset check numbers on Z of Financial or Open Check Reports
 Option to print Barcodes on checks
 Option to use Alpha Check Numbers