SPS-2000 Program Manual v1.30 Appendix 181
42 Station Totals X1 IRC
43 Active Employees – time keeping X1 read only IRC
44 Daily Time Keeping X1 & Z1 also X5 to Z5 IRC
45 Shift Reporting X1 & Z1 INDIVIDUAL & IRC
46 Inventory X1 & Z1 IRC
47 PLU Stock X1 & Z1 INDIVIDUAL & IRC
48 Not use this by REPORT key function.
49 Stock by Group X1 & Z1 INDIVIDUAL & IRC
50 Stock by Individual Group X1 & Z1 INDIVIDUAL & IRC
51 Food Cost X1 & Z1 IRC
52 PLU Minimum Stock X1 & Z1 INDIVIDUAL & IRC
53 Not use this by REPORT key function.
54 String Report 1 – as defined by program X1 & Z1* INDIVIDUAL & IRC
55 String Report 2 – as defined by program X1 & Z1 * INDIVIDUAL & IRC
56 String Report 3 – as defined by program X1 & Z1* INDIVIDUAL & IRC
57 String Report 4 – as defined by program X1 & Z1* INDIVIDUAL & IRC
58 Custom Report X1 & Z1 INDIVIDUAL
59 Pre-Poll Report – Hard Copy Print Out X1 & Z1 INDIVIDUAL & IRC
60 Not use this by REPORT key function.
61 Clocked in employees X1 read only INDIVIDUAL & IRC
* Generates X/Z Level based on string report programming in PGM mode.
Report Option Table
NO. REPORT NAME OPTION
06 PLU’s by Group for Selected Group Group number (1~2 digit)
14 Individual Employees Employee number (1~3 digit)
18 From/To Groups Frome/To Group number (4 digits)
If from group number is 1 and to group number is 2,
option data is 0102.
19 Selective Groups Group number (1~2 digit)
41 Product Projections Week data (1 digit)
45 Shift Reporting Shift number (1 digit)
50 Stock by Individual Group Group number (1~2 digit)
To Next Page
Loading...
Need help?
General
