SPS-2000 Program Manual v1.30 P Mode Programming 141
Recipe Table
Here you assign ingredients to a recipe. If a PLU is linked to a recipe, PLU activity will cause the inventory
of ingredients used in the recipe to decrement. Each recipe can use up to 20 ingredients.
1. From the PGM mode PROGRAMMING MENU touch PRODUCT & INGREDIENT to view the
PRODUCT & INGREDIENT selection window.
2. Touch RECIPE TABLE to access the RECIPE PROGRAMMING screen. .
3. Refer to the notes that follow.
4. Touch CLOSE to exit the program.
Recipe Table Program Notes
ING/RECIPE
Choose whether this line corresponds to an INGredient or a RECIPE. (A recipe may be composed of
recipes. For example, a special sauce (a recipe) may be an ingredient of a sandwich recipe.)
#
Enter the 3-digit number of the recipe or ingredient.
DESCRIPTOR
Display only. When a recipe or ingredient number is entered, the corresponding descriptor displays.
QTY
Enter the amount of inventory items used in the recipe, i.e. 1 patty for a regular hamburger, or 2 patties
for double hamburger.
Product Mix Items
Product Mix items are can be inventoried as they are purchased. For example, a box of burger patties.
Product Mix Item Program Notes
DESCRIPTOR
Each product mix group item can have a 12 character alpha descriptor.
PCS\UNIT
Enter the number of pieces in the unit. For the example shown, 120 burgers to the case- Enter 120; 30
cups to the sleeve- Enter 30.
UNIT@
Enter a 4 Character descriptor for the unit, using the Alpha-keyboard overlay. This descriptor is for
report purposes.
To Next Page
Loading...
Need help?
General
