SPS-2000 Program Manual v1.30 Program Guides 159
Program Guides
Delivery System Program Guide
1. Set the number of delivery tables: S/Memory Allocation/Option #33.
2. Use tracking file #1 for delivery tracking: S/System Options/Option #21.
3. Set Tracking files as you would any in other tracking system:
Set the register number that holds check tracking data and the register that holds back-up data
(S/System Options/Options #10 & 11 -- for single register systems, just set the register number.)
Set Memory Allocation for number of lines per check and maximum number of checks
(S/Memory Allocation/Options # 11 & 12). Be certain that the number of tracking files available
exceeds the number of delivery tables that might be open at one time.
4. Use the Key Relocation program to assign function keys as necessary: Delivery (function key code
#069); Park Delivery (function key code #070); Serv Delivery (function key code #071).
5. Use the Key Relocation program to assign Store Check 1, Recall Check 1, and List Check 1
function keys. Use the default options for the Recall Check 1 key, do not enable drive thru, set
“assigned by register” to No, and set the length of Check# in Digits” to 00.
Training Mode Program Guide
1. Designate an employee file to be used for training. Set the P Mode Employee Option for that
employee to “Training Mode” = YES.
2. Refer to P Mode System Options/Training Mode Options select printing, drawer and other training
related options.
To Next Page
Loading...
Need help?
General
