76 S Mode Programming SPS-2000 Program Manual v1.30
FTP Transmission
Choose FTP Transmission to send reports via FTP (file transfer protocol). You must first set network options
under S-Mode/SYSTEM OPTIONS. (If you wish to demonstrate this capability, contact CRS for
demonstration documentation.)
1. Select SRAM BACKUP from the S-Mode menu.
2. Touch FTP TRANSMISSION. Enter the information for the FTP site you are
connecting to:
3. Touch CONNECT. If the connection is successful, the following screen
displays:
4. Select file(s) you want to transmit and touch UPLOAD FILES.
Always set
to 21
Set IP
address of
FTP server
FTP ID &
Password will
be assigned by
the FTP site
administrator
To Next Page
Loading...
Need help?
General
