SPS-2000 Program Manual v1.30 Software Installation & SD Memory Utilities 21
SPS-2000 Program Components
The table below summarizes the two distinct program update methods and requirements for each method.
Update Method TFTP Server SD Card/USB
Connection
LAN None
Updates:
Application,
MICOM, Boot
Programs, O/S Files
Application Only;
O/S can be
updated when
BootROM is
V1.10 or later
Files Required
zImage
app.yaffs
NandBoot.bin
Ramdisk.gz
xlib.yaffs
Optional Files
Bootrom.bin
Micom.bin
Locate O/S files in
“/Update” folder
on SD/USB card.
Update Bootrom
and Micom only
when instructed.
Utilities Required
SolarWinds.Net
TFTP Server
None
Notes
In most cases, the application program will be the only program that will require updating.
1. Application Program – This program will be frequently updated as features and operations are
changed. (Do not confuse the application program with the end-user program, which consists of the
files and setting prepared for an end user installation.)
2. MICOM – The MICOM is supported by it’s own flash memory. MICOM controls LCD brightness,
touch screen, buzzer and MSR. It is anticipated that this program area will remain stable. You will be
notified in the case that this program changes.
3. The Boot Area program is executed on power-on. It initializes hardware and loads the OS (Linux) to
main memory. It is anticipated that this program area will remain stable. You will be notified in the
case that this program changes.
4. KERNAL version v1.10 or later (released 11/04/2008) supports two USB ports and allows screen
capture to USB (F10 saves to USB).
To Next Page
Loading...
Need help?
General
