SPS-2000 Program Manual v1.30 Introduction 15
Keylinks
The main screen provides 40 programmable locations. In addition to the main screen you can define 199
additional 40-location screens referred to as “Keylinks”. (Note that the default program pre-defines the first
12 keylinks for PLU lists and various function lists.)
In the example depicted below, the PLU List keys and the Payment key open new Keylink Screens.
More about Keylinks
Keylinks have multiple uses. Typically they will be used as menu screens containing like items such
as entrees, appetizers or drinks or condiments. They may also be used to organize function keys such
as discounts or type of payment keys.
Keylinks can display any combination of PLU keys (menu items or condiments) or function keys
such as % keys, media keys, etc.
Keylinks can be opened (displayed) by touching a key on the Main screen or by touching a key on
another Keylink. Keylinks can also be opened automatically after the entry of a PLU item (see PLU
Programming).
Keylinks can be programmed to remain open for unlimited entries, with the DONE key used to close
the Keylink screen, or can be programmed to close automatically after a set number of entries are
completed.
To Next Page
Loading...
Need help?
General
