SPS-2000 Program Manual v1.30 S Mode Programming 51
Key Relocation (V2.xxx)
NOTE:
► From the S mode MAIN MENU touch KEY RELOCATON to display the S mode KEY RELOCATON
Screen.
Note: Key Relocation functions shown here are also available in PGM mode.
The main screen provides 40 programmable locations. In addition to the main screen you can define 200
additional 40-location screens referred to as “Key Links”. (Note that the default program pre-defines the first
12 keylinks for PLU lists and various function lists.) Use this program to set function locations on each Key
Link.
Use these keys to select the
Main Screen or any of the
200 Ke
Links
Select one of 4 font sizes
Touch here to set Key Link
options, i.e. # of choices,
exit with DONE ke
etc.
Touch a button color to
select a different color.
Touch here to select a
button size/type.
Inactive buttons (“X”)
do not display in REG
mode.
Touch KEY to select the key
function. Touch IMAGE to
display a key image
Touch KEY to place this
key on all or selected Key
Links. Touch SHAPE to
place this key shape on all
or selected Key Links
Select black or white font
color.
Touch Copy to copy the keys on
this screen to a range of other
screens
Beginning with version 2.01m, you can
program a key descriptor that is independent
of the PLU descriptor. (If the key descriptor
is formatted or abbreviated to fit the key
location, the result may not always look
pleasing when printed on the receipt or guest
check.)
To Next Page
Loading...
Need help?
General
