98 P Mode Programming SPS-2000 Program Manual v1.30
PLU Group
Groups are designated to accumulate PLU sales for convenient reporting totals. A PLU can send its' sales
information to up to 3 groups. Group Link #1 is set in PLU programming. Group Links #2 and #3 are set in
PLU Status Group programming.
This program allows you to set up the groups that PLU sales will report to. There are 99 groups. Here you
can program the group descriptor that appears on reports, and you can determine whether that group will add
to the total of all groups that appears at the end of the Group report.
1. From the P Mode menu screen, touch Group to display group program options.
2. Touch Next Record or Prev. Record to view the group you wish to program.
3. Set the Descriptor and Add to Group Total status.
4. (V2.02n or later) If the Print key is to issue requisitions sequentially by meal order number, set the
sequence of the group here. For example if the print key is to release appetizers first, then main
items, and then desserts, separate appetizers, main items and desserts by group and set the “MEAL
ORDER FOR KP” as 1, 2, and 3 respectively. You must also set Print Key (key #190) Function key
Program option “Automatically Print Meal Orderly” to Yes.
5. Touch Close to exit.
To Next Page
Loading...
Need help?
General
