72 S Mode Programming SPS-2000 Program Manual v1.30
Password Notes
The correct password is required to access Report Mode, P-Mode and S-Mode. Also, manager controlled
activities can be completed only after the correct password is entered.
Default S-Mode and P-Mode Passwords are: 2000; the default Report Mode password is: 0000 (meaning
no password entry is required to access this mode); the default manager password is: 9999. You can set
your own 4-digit passwords by selecting Passwords in S mode.
Separate passwords for report levels (X and Z1-Z5) can be set in S-Mode System Option #7. Here the
default password is also 0000, meaning all report levels can be accessed without password entry.
Authority Level option #40 (found in P-Mode/Employee) allows access to Report Mode, P-Mode and S-
Mode without password entry. Employees (such as managers) linked to an authority level with this
option selected, can conveniently access all modes without password entry.
To Next Page
Loading...
Need help?
General
