14 ď‚· Introduction SPS-2000 Program Manual v1.30
Default Screen Layout
Screen Saver
A screen saver can be implemented by going to page #5 of P-Mode General Function Options. Depending
upon the setting, the screen saver will display after 1 to 99 minutes of inactivity.
When the screen saver is activated, simply touch the screen to restore the normal display.
MACRO33 (function #109)
=
DONE (function #37)
MACRO34 (function #110)
=
PLU (function #167)
MACRO35 (function #111)
=
PREV. (function #168)
MACRO36 (function #112)
=
X/TIME (function #244)
MACRO37 (function #113)
=
SUBTOTAL (function #218)
MACRO38 (function #114)
=
CLEAR (function #24)
MACRO39 (function #115)
=
CASH (function #18)
MACRO40 (function #116)
=
VOID ITEM (function #241)
Mode Tabs
Touch one of the four
Tabs to control the
SPS-2000 Mode:
REG = Registration
REP = Reports
PRG = Program
S = Secure Mode
A password may be
required to access to
REG, PRG & S
modes.
Transaction Detail
is displayed here. If
over 12 items are
registered, a scroll
bar displays.
Main Screen
Forty keys display on
the main screen.
Keys can be
items/categories
(PLUs) or functions.
A total of 200
different screens
(Keylinks) can be
defined to organize
items or functions.
Message Line:
Displays Error
Messages, Clerk
Identification &
Transaction
totals.
Fixed Numeric
Keys
The 10-key pad
keys are fixed.
They cannot be
moved or
changed.
Transaction
Summar
Line.
Status Line:
Current Price
level, Receipt
on/off status &
register #.
Fixed Function Keys
Before version 3.00j, the eight essential function keys are fixed. At
3.00j or later, the eight keys are macros (Macros 33-40) that default
to the functions labeled, but can be re-assigned as necessary through
macro programming. See the table below for the default
assignments:
To Next Page
Loading...
Need help?
General
