Sam4s SPS-2000 - Open Check by MCR - Program Guide

176  Program Guides SPS-2000 Program Manual v1.30
Open Check by MCR – Program Guide
Note: This feature requires software version 2.00s or later.
1. Set the CARD READER ENABLE option to YES. (GENERAL FUNCTION
OPTIONS)
2. At the P Mode, SYSTEM OPTION/TRACKING FILE OPTION #18, select:
The tracking file that will be used: CHECK #1, #2, #3 or #4
The magnetic track that will be read: track 1 or track 2
Enter the number of the column that the Card number starts
Enter the number of digits to be read for the Card number.