Sam4s SPS-2000 - Custom Screen Layouts

18  Introduction SPS-2000 Program Manual v1.30
Memory All Clear
 Power OFF the SPS-2000 using the main power switch is located on bottom of SPS-2000 in the
right-rear corner.
 Hold front power button down.
 Turn SPS-2000 main power switch ON while holding down front power button.
 Touch [1][2][8][7] for system password.
 Touch ALL CLEAR.
 Touch YES when prompted “ALL CLEAR THE MACHINE?”
 The SPS-2000 will reboot.
 Enter the station number after the station reboots: [1] OK.