124 P Mode Programming SPS-2000 Program Manual v1.30
(34) PRE LOGO IMAGE# ON RECEIPT
Select one of the loaded bit map images.
(35) POST LOGO IMAGE# ON RECEIPT
Select one of the loaded bit map images.
(36) PRE LOGO Image ON GUEST CHECK
Select one of the loaded bit map images.
(37) POST LOGO Image ON GUEST CHECK
Select one of the loaded bit map images.
(38) PRINT ERROR CORRECT/VOID ON EJ & PRINTER
When set to YES, error corrects and item voids will still be resent on the EJ.
(39) PRINT DELIVERY INFO. ON RECEIPT (requires 2.01n or later)
If yes, delivery information (name, address, etc., from the customer delivery record) will print on the
receipt.
(40) RESET PREVIOUS ITEM COUNTER FOR RECALL (requires 2.01n or later)
If yes, the guest check item counter will reset upon check recall, the counter will only accumulate the total
of items at each posting.
(41) PRINT PROMTION AFTER TRIGGER PLU (requires 2.02b or later)
(42) ENABLE BARCODE PRINTING (requires 2.02b or later)
(43) NO SIGNATURE SLIP IF TRANSACTION TOTAL IS LESS THAN (requires 2.03j or later)
When the MISC TEND transaction is less than XX.XX the merchant copy of the EFT transaction will not
print the signature line.
To Next Page
Loading...
Need help?
General
