SPS-2000 Program Manual v1.30 P Mode Programming 139
Time Activated Function Activate Time or
Start/End Times
Day of Week Repeat Time
Price Level Yes Yes
Screen Level Yes Yes
Macros Yes Yes Yes
String Report Yes Yes Yes
Shifts Yes
Time Period Yes
Sending Time Activated String Reports to an FTP Site
The Time Activated String Report Function provides an option to send the string report to an FTP site. If this
option is selected, you must first make the appropriate network settings and identify the FTP server address.
These settings are found in a separate document titled "SPS-2000/SPS 5X0 FTP Reports” that is posted under
Support Documents on the SPS-2000 and SPS-5X0 Dealer Support Pages. Go to this document for complete
FTP setup instructions. To select this option:
1. Go to PGM/TIME/TIME ACTIVATE FUNCTIONS/STRING REPORT. The appropriate Time
Activate String Report screen displays.
2. Select the SEND TO FTP option.
FILE NOTE: The string report is sent as a text file, for example: “0_REG1_STRREP120110309153601.txt”
where:
0 = Store name
REG1 = Register Number
STRREP1 = String report #1
2011 = Year
03 = Month
09 = Day
153601 = Time
To Next Page
Loading...
Need help?
General
